PV Powered PVP260kW Informacje Techniczne Pobierz pdf (Strona 47)

PVP250kW & PVP260kW Inverter

Installation & Operation Manual

2. Position the inverter to the preferred location.

Alternate methods of lifting and positioning the inverter may be used. Proper

methods may include the use of a crane with a strap rated for the weight of the

inverter; however, care MUST be taken to protect the inverter from compressive

stresses or forces which may dent or deform the cabinet or cause damage to the

inverter. Use of lifting beams, spreader bars, or similar equipment rated for the

weight of the inverter can be employed for this purpose. Damage caused by

improper handling may void the warranty.

Safe operating, handling, and installation practices are the responsibility of the

installer.

3. Secure the inverter to the concrete base by setting the anchoring hardware through

each of the six holes in the external mounting ange as shown in sheet two of

Appen-

dix C - Mechanical Drawings

The anged inverter base allows the unit to be anchored after positioning.

4.4 Conduit Entry

AC and DC cables can be brought into the inverter through the side or bottom gland

plates as shown in

Appendix C - Mechanical Drawings

WARNING

All penetrations in the inverter cabinet must be through the six gland plates

which are provided for the sole purpose of providing a safe and convenient

way to bring wiring in to and out of the inverter. Penetrating the inverter

housing in any other location besides the gland plates voids the warranty.

AVERTISSEMENT

Tout travail à l’intérieur de la structure de l’onduleur doit être effectué en

démontant les plaques libres conçues uniquement pour fournir des ouvertures

permettant de travailler facilement et en toute sécurité sur le câblage de

l’appareil. Tout travail effectué à partir d’autres ouvertures entrainerait une

annulation de la garantie.

Using Gland Plates for Cable Entry and Exit

All power cabling and communications wiring must enter and exit via the inverter

cabinet’s gland plates. There are gland plates on the AC and DC sides of the inverter for

bottom and side entry. In addition, there is a gland plate on the upper right side for data

monitoring wiring. Each gland plate location is selected to ensure safe installation, proper

airow and prevention of dust, debris, moisture, insect and animal incursion. Do not

penetrate the cabinet at any other location. All gland plates need to be installed for proper

operation of the inverter.

To use a gland plate:

1. Select the size(s) and location(s) of the hole(s) that need to be punched.

2. Remove the gland plate while taking care not to damage the weatherproof gasket

material on the back side of the plate.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 128 129

Komentarze do niniejszej Instrukcji

Brak uwag

PV Powered PVP260kW Informacje Techniczne Strona 47

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Zasilacze i falowniki PV Powered PVP260kW