PV Powered 5200 Instrukcja Obsługi Pobierz pdf (Strona 26)

Operation

7 Operation

7.1 Control and Display Panel

Control and Display Panel of SolarRiver inverter is shown as figure 18.

Figure 18 HMI Interface

There are 6 buttons: OK, ESC, UP, DOWN, RIGHT, LEFT.

OK button: confirm the selection.

ESC button: exit current screen or selection

Up button: move cursor to up selection or increase the values

DOWN button: move cursor to down or decrease the values.

RIGHT button: move cursor to right side or increase the backlight.

LEFT button: move cursor to left side or decrease the backlight.

There are two LEDS on the panel. Different LED status means inverter different working statutes.

Table 4 LED statutes

Wait: Inverter is checking in this state. If finds fault or error, will enter Fault or Permanent state.

normal：Inverter feeds AC current into grid. If any error or fault occurs, inverter will go to Fault State

or Permanent State.

fault：Inverter has checked some recoverable error. It can recover if the error disappears. If in Fault

State continually, you should check the inverter according to table 5.

permanent：Inverter has checked some unrecoverable error. You should take some measure or ask

for help.

When the inverter operates normally, user touch any button, then the backlight will be on, and inverter

will display home interface. If none key touched for 60 seconds, the backlight will be off. In next 10

seconds if still no operation the screen will back to home interface, otherwise the backlight will be

illuminated.

Note: After starting inverter and restoring the factory settings, LCD backlight will not shut down

automatically.

LED

green

red

flash

Wait state

Fault state

SolarRiver

ESC OK

Home

2012-03-03 10

Press Esc to Main Menu

Power

Today

Total

0.0 W

0.0 KWh

208.4 V

205.9 V

1.045 kw

49.99 Hz

kwh

Green LED

Red LED

Buttons

LCD

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Komentarze do niniejszej Instrukcji

Brak uwag

PV Powered 5200 Instrukcja Obsługi Strona 26

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Zasilacze i falowniki PV Powered 5200